Search:     Advanced search
Instructional Technologies
 
document Smartcart Use I. Turning On Power to the Cart
Turning On Power to the Cart Step1.     The first step to take when preparing to use a smartcart is to make sure that the cart has power. Each cart has a power strip attached to it that's usually located on the lower portion of the back panel (either on its...
16 May, 2012 Views: 2355 Comments: 0
document Smartcart Use II. Powering On Other Cart Devices
Powering on Other Cart Devices Once you're certain there's power available to the cart, you may begin to turn on other devices. It's recommended that you turn the devices on in the order presented below; and conversely, turn them off in the opposite order when powering them down: Step...
16 May, 2012 Views: 2113 Comments: 0
document Smartcart Use III. Sending an Image to the Projector
Sending an Image to the Projector There are two devices on every smartcart from which you can choose to send an image to the projector: one is the computer (or a laptop if you've connected one) and the other is the DVD/VCR. In the case of the computer, whatever appears on the monitor, is what...
16 May, 2012 Views: 1737 Comments: 0
document Smartcart Use IV. Logging Onto the Computer
Logging in to a smartcart/lab machine using Windows 7: 1. Press "Control, Alt, and Delete" at the same time. 2. Press "Ok" to continue. 3. If someone is already logged-in, click "switch user" or if locked "cancel", then "switch user". Otherwise enter your sage Username and Password at the...
16 May, 2012 Views: 2481 Comments: 0
document Smartcart Use V. Connecting Your Laptop to a Smartcart
V.  Connecting Your Laptop to a Smartcart ► Equipment involved Located on the center shelf of each smartcart is a black cable (called a VGA cable) that has a bright green or hot pink label on it that says "Laptop Cable". This cable is attached to a beige-colored box called a KVM...
15 May, 2012 Views: 2033 Comments: 0
document Smartcart Use VI. Wireless Remote Control Devices
Wireless Remote Control Devices Sage uses several different models of projectors and DVD/VCR's on its smartcarts. The remote control devices associated with these different models may therefore vary slightly in appearance from one cart to another. This article will provide images...
16 May, 2012 Views: 2297 Comments: 0
document Powerpoint tips for a better presentation
Using PowerPoint Do you want to have a "good" PowerPoint presentation, or just get it done? If you just want to get it done, then you use the navigation bar at the top to get to the how-tos. If, however, you want to know how to create "good" PowerPoint then read on. Here are some very basic...
16 May, 2012 Views: 3142 Comments: 0
document Emerging Technologies
Emerging Technologies Feeds: RSS and Podcasting RSS: Web feeds provide web content or summaries of web content together with links to the full versions of the content, and other metadata. CampusCruiser allows you to add RSS Feeds, not only to your dashboard, but also to the welcome page of your...
14 May, 2012 Views: 3877 Comments: 0
document How to backup Firefox bookmarks
Backing up firefox bookmarks 1.  Click the Bookmarks button on the right side of the navigation toolbar (Windows XP: click the Bookmarks menu) and select Show All Bookmarks to open the Library window. 2.  In the Library window, click the Import and Backup button and then select...
16 May, 2012 Views: 1460 Comments: 0
document How to install Malwarebytes
What Malwarebytes does for your computer is scan and remove any detected malware on your machine. Malware can be briefly defined as harmful coding or files on your computer with the intention of ruining or slowing computer performance and gain unauthorized permission to all of your...
16 May, 2012 Views: 1869 Comments: 0
document How to use a Document Camera
The Sage Colleges now use document cameras in several classrooms on both campuses. These models range from the ELMO unit to the newer AVerMedia cp355 and F50. All models have the ability to zoom and focus the camera to project an image from a doucment or any object, similar to a webcam. The...
15 May, 2012 Views: 1443 Comments: 0
document How to use EBeam smartboard software
EBeam smartboards are currently located in the following areas: Schact fine arts music rooms B and C,  and Roy Court 4 To use EBeam software, start the scrapbook or paellete tools program on your desktop and see the following diagram: If selecting the drawing tools, there is further...
12 Sep, 2012 Views: 3371 Comments: 0
document How to use the Lenovo wireless keyboard and mouse
Please note that this device is BOTH a keyboard and a mouse in one, so nothing further should be needed to operate a computer. To start using the device, turn it over and move the switch to the desired position. Please then switch to "Off" when done. please see the following image to help...
12 Dec, 2012 Views: 2981 Comments: 0
document How to use original SMART interactive whiteboards
1. Turn on projector, and login to the computer. 2.  You can simply use your finger to interact with the smartboard. 3. If cursor is not correctly aligned, you can calibrate by pressing and holding the Keyboard and the Right Mouse button simultaneously until the Orientation screen appears. ...
28 Feb, 2013 Views: 1148 Comments: 0
document Videoconferencing rooms on campus
The following videoconferencing rooms are available for reserve on campus. To reserve a room contact Conferences at 244-2020 or [email protected] Troy campus: Hart 304 Hart 301 Cowee 4 John Paine 101 Albany Campus: Library 3rd floor KCC 105 KCC 205
05 Aug, 2013 Views: 841 Comments: 0
document How to use Shea Learning Center SmartCarts (Crestron) and Study Rooms
Beginning Fall 2013, The Sage Colleges have created three new classrooms in the Shea Learning Center, along with many study rooms with enhanced technology. Each classroom has a new controller device that will 1) turn on the projector, 2) change the audio and video source 3) allows for control...
29 Aug, 2013 Views: 1211 Comments: 0
document Classroom of the Future: Miscellaneous Features
To Turn on One Television: Make sure the Creston app is open if using the iPad From home screen, at the bottom click “Video Override” Each television will be listed as Display 1, Display 2 and so on. The numbers correspond to the numbers labeled on the television. Find the appropriate...
10 Nov, 2014 Views: 557 Comments: 0
document Classroom of the Future: How to Display from One Computer to All TVs
How to Display from One Computer to All TVs From iPad or Control Panel: Follow steps in “How to Display to a TV.” Make sure the Creston app is open if using the iPad From the home screen, click “video override” On the video override screen, you will see 4 different colored TV...
10 Nov, 2014 Views: 536 Comments: 0
document Classroom of the Future: How to Display Multiple Computers on One TV
Follow steps outlined in ‘How to Display to a TV’ for up to 4 computers Use the same television’s URL address for all four On the computers, on the Creston program, click the settings box. It is between the X and the – sign on the right-hand side, and resembles a piece of lined paper. ...
10 Nov, 2014 Views: 633 Comments: 0
document Classroom of the Future: How to Display Computer to a TV
From iPad or Control Panel: Make sure the Creston app is open if using the iPad Open app on bottom of screen labeled Creston From home screen, click “Auto Room Setup” in left hand corner. This will turn all televisions on. Note: All televisions will show a URL at the top of...
10 Nov, 2014 Views: 604 Comments: 0

← Previous Next
1 2